G31527
Cook Fusion Oasis-One Action Stent Introduction System 9F
$5.00
eaches
In Stock: 12 Eaches
Expiration:
Expired
Express: Need it tomorrow? Order in next 2 hours 8 minutes and choose overnight shipping at checkout.
The item listed above is expired and may be used for educational, training, and non-clinical research purposes only. Any product information appearing below, including the product indication statement, pertains to an in-date item only.
Medtronic Surgipro blue 30" CV-11 taper, double armed
$20.00 packets
Medtronic Maxon green 5 x 18" GS-21 taper (5 sutures per packet: D-TACH)
$259.00 box of 12
Medtronic Monosof black 18" C-15 cutting
$4.00 packets
Medtronic Chromic Gut 36" GS-25 (CTX) Taper
$5.25 packets
Medtronic Surgipro blue 60" GS-26 taper
$1.00 packets
Description
Cook Medical Fusion® OASIS® One Action
Used for endoscopic biliary stent placement to drain obstructed bile ducts.
Product Code: G31527 / FS-OA-10
- Pushing Catheter Size: 9F
- Guiding Catheter Size: 5.5F
- Pushing/Guiding Catheter Length: 195cm
- Wire Guide Diameter: 0.035"
- Minimum Accessory Channel: 4.2mm
- Single use only
- Eliminate the need for recannulation when placing multiple stents, repositioning a stent, or fully removing the stent from the ductal system
- Integrated guiding and pushing catheter provides optimal pushability when negotiating tortuous anatomy
- Compatible with a wide variety of our exceptional plastic stents
Additional information
| Size | 9.0F |
|---|---|
| Arms | N/A |
| Manufacturer | |
| Unit | eaches |
- FDA Product Code: FGE
- FDA Product Code Name: Catheter, Biliary, Diagnostic / Stents, Drains And Dilators For The Biliary Ducts
- GMDN Term Code: 46689
- GMDN Term Name: Endoscopic stent-placement system
- GMDN Term Description: An assembly of sterile devices inserted through a compatible flexible endoscope to implant a stent, typically into a pancreatic or biliary duct in order to maintain patency. It typically consists of a positioning catheter onto which the stent is loaded, a guiding device (commonly known as an introducer or guidewire) that aids the initial placement of the stent, and a pusher catheter that holds the stent in place during withdrawal of the other component devices. It is commonly made of polytetrafluoroethylene (PTFE) [Teflon], or polyethylene (PE). This is a single-use device.
