AR-1410LP-50
Arthrex Low Profile Reamer, 10.5mm
$4.50
box of 1
In Stock: 34 Eaches
Expiration:
Expired
Express: Need it tomorrow? Order in next 2 hours 8 minutes and choose overnight shipping at checkout.
The item listed above is expired and may be used for educational, training, and non-clinical research purposes only. Any product information appearing below, including the product indication statement, pertains to an in-date item only.
Medtronic Polysorb violet 30" CV-25 taper
$2.25 packets
Medtronic Surgipro blue 36" Cardiopint CV-1 (BV-1) Taper, Double Armed
$999.00 box of 36
Medtronic TiCron blue 30" GS-21 taper
$4.00 packets
Ethibond green 8 x 18" CT-2 taper, CR/8 (8 sutures per packet)
$495.00 box of 24
Medtronic Surgipro blue 24" CV-11 taper, double armed
$5.00 packets
Medtronic Surgipro blue 30" V-20 taper
$36.00 box of 36
Chromic Gut 3 x 18" strands (3 strands per packet)
$44.00 box of 36
Description
Arthrex AR-1410LP-50 Low Profile Reamer
The Arthrex AR-1410LP-50 Low Profile Reamer is a precision-engineered surgical tool designed for minimally invasive joint preparation, particularly in arthroscopic and orthopedic procedures. With a 10.5mm cutting diameter and streamlined low-profile design, this reamer allows for enhanced access in tight joint spaces while minimizing disruption to surrounding tissues. Ideal for procedures requiring controlled reaming and accurate bone socket creation, it integrates seamlessly with Arthrex power systems and instrumentation.
Low-profile reamers facilitate femoral socket preparation through the medial portal and also allow greater flexibility in femoral socket placement for transtibial procedures. The reamer's extra thin shaft and “2-flute” design provide a flat profile that easily passes through the portal and avoids damaging the femoral condyle and PCL. The reduced length of the flutes allows the drill to spin without contacting PCL fibers. Low-profile reamers may be used with the Arthrex Transportal ACL Guides for anatomic guide pin placement through the medial portal.
Product Code: AR-1410LP-50
- Cutting Diameter: 10.5mm
- Design: Low-profile for tight joint access
- Compatibility: Arthrex reamer drivers and systems
- Use: Reusable surgical instrument
Contents
- (1) Arthrex Low Profile Reamer
Features
- Low-profile design enhances access in tight joint spaces
- Enables controlled reaming and accurate bone socket creation
- Compatible with Arthrex power systems and instrumentation
Sterilization
- Device Packaged as Sterile: No
- Requires Sterilization Prior to Use: Yes
- Single-Use, Disposable: No
Additional Details
- Brand: Arthrex
- Category: Orthopedic Instruments
- Type: Reamer, Low Profile
- FDA Product Code: LXH
- FDA Product Code Name: ORTHOPEDIC MANUAL SURGICAL INSTRUMENT
- GMDN Term Code: 61807
- GMDN Term Name: Bone-resection orthopaedic reamer, single-use
- GMDN Term Definition: An orthopaedic surgical instrument intended to resect bone (cut out part of the bone), and in some cases hypertrophic tissue [e.g., ligamentum flavum], to: 1) accept a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna); and/or 2) relieve pressure at or facilitate access to a joint. Commonly called a mill or a reamer, it is typically designed as a stainless steel cylindrical body with an end/circumferential cutting edge and is attached to a shaft for manual or powered rotation. This is a single-use device.
Additional information
| Size | 10.50mm |
|---|---|
| Arms | N/A |
| Manufacturer | |
| Unit | box of 1 |
- FDA Product Code: LXH
- FDA Product Code Name: Orthopedic Manual Surgical Instrument
- GMDN Term Code: 61807
- GMDN Term Name: Bone-resection orthopaedic reamer, single-use
- GMDN Term Description: An orthopaedic surgical instrument intended to resect bone (cut out part of the bone), and in some cases hypertrophic tissue [e.g., ligamentum flavum], to: 1) accept a prosthetic implant, typically at or within a joint (e.g., condyle of knee, neck of humerus, olecranon of ulna); and/or 2) relieve pressure at or facilitate access to a joint. Commonly called a mill or a reamer, it is typically designed as a stainless steel cylindrical body with an end/circumferential cutting edge and is attached to a shaft for manual or powered rotation. This is a single-use device.
